Fsa Bb30 2.5mm Mtb Spacer

  • Fsa Bb30 2.5mm Mtb Spacer
    Fsa Bb30 2.5mm Mtb Spacer
    Evans Cycles
    Review this store
    Cycling
    Fsa
    Use this page to find out all you need to know about the FSA BB30 2.5mm MTB Spacer, available to buy online in minutes from Evans Cycles, the UK's largest quality cycle retailer, using our quick, simple and secure checkout procedure.
    £2.99

    Visit Store »

Add a Review/Comment

 

Similar Products

Magnify A2z 0.25mm Caliper Spacers
A2z 0.25mm Caliper Spacers
A2z 0.25mm Caliper Spacers
Cycling
A2z
A2Z 0.25mm Caliper Spacers: 12pcs of 0.25mm stainless steel washers for correct gap between brake pads and rotor.
Review this product
 
Wiggle
Review this store
 
£4.95
 
Visit Store »
Magnify Sram Bb30 Bearing Assembly Kit
Sram Bb30 Bearing Assembly Kit
Sram Bb30 Bearing Assembly Kit
Cycling
Sram
The SRAM BB30 Bearing Assembly Kit is stiffer than standard bottom brackets - delivering more power to the pedal. It is also lighter and offers more ankle clearance, ideal for comfortably flying up the hills. Compatible with BB30 ready frames and SRAM and Truvativ BB30 cranksets.
Review this product
 
Evans Cycles
Review this store
 
£23.99
 
Visit Store »
Magnify Fsa Afterburner Bb30 9 Spd Triple Chainset
Fsa Afterburner Bb30 9 Spd Triple Chainset
Fsa Afterburner Bb30 9 Spd Triple Chainset
Cycling
Fsa
FSA Afterburner BB30 9 Spd Triple Chainset: Hollow forged AL6061 arms Cartridge BB30 bearings AL7075 100% CNC machined chainrings Aluminium Torx T-30 bolts Fits 68 or 73mm BB30 shells BCD: 104/64mm Chainline: 50mm High polished grey anodised Laser graphics Weight: 832g Rings: 44/32/22
Review this product
 
Wiggle
Review this store
 
£233.96
 
Visit Store »
Magnify Wheels Manufacturing Bb30 To 24mm Crank Spindle Shims
Wheels Manufacturing Bb30 To 24mm Crank Spindle Shims
Wheels Manufacturing Bb30 To 24mm Crank Spindle Shims
Cycling
Wheels Manufacturing
Wheels Manufacturing BB30 to 24mm Crank Spindle Shims: Run Shimano Hollowtech-II cranks in your BB30 frame. This system will adapt any 24mm NON TAPERED spindle crank. The Shims are based on industry standard BB30 bottom bracket shells and are easy to install and machined for exact fit. You will need the 6806 bearings already installed into the BB30 shell to start this conversion. Shims press fit directly into BB30 bearings (6806) Removal is the opposite of installation You may need to gently tap them out from the opposite side
Review this product
 
Wiggle
Review this store
 
£26.99
 
Visit Store »