Pro Cable Cutters With Multi-function Head
-
Pro Cable Cutters With Multi-function Head
Review this store
Hand Tools
Pro
Pro Cable Cutters with Multi-Function Head: Cable cutters with a high density hardened steel head for increased durability. Comfortable ergonomic handle design Locking jaw design for safe storage Two cutting heads for multi-function use
£24.29
Visit Store »
Similar Products
 
|
Lifeline Cable And Housing Cutters Hand Tools Lifeline LifeLine Cable And Housing Cutters: Lifeline have brought us these fantastic value inner and outer cable cutters Easy to use cable and housing cutters, with curved grippy handles for a firm and precise grip. They use a spring to allow you to position the cable whilst holding the cutters in place, meaning you have complete control of where you want to cut. Then once finished simply clip over the catch to protect the cutting edges and hang em up from it. Review this product |
Review this store |
£14.99 |
Visit Store » |
|
Shimano Sis Cable Cutters Hand Tools Shimano Shimano SIS Cable Cutters: Widely regarded as the industry standard bicycle cable cutters, recommended for use on all SIS outers and cables. Use to cut cable outer casing, cables and for pinching cable end caps and ferrules. Contoured handles for comfortable grip. Sprung jaws. Section for pinching cable end caps and ferrules without cutting them. Locking mechanism keeps jaws safely closed when not in use. Review this product |
Review this store |
£53.99 |
Visit Store » |
|
Park Cn10 Cable Cutters Cycling Park Workshop quality tool for use on all bicycle cables and housings. The Park CN10 Cable Cutters have been specifically designed to cleanly cut, without crushing, all types of bicycle cabling, including hard to cut indexed gear housing. Cold forged, heat-treated steel handles for strength and precision ground cutting jaws for a clean cut, every time. Dual density grips contoured for superior comfort. Review this product |
 Review this store |
£33.29 |
Visit Store » |
|
Gore Bike Wear Rideon Low Friction White Brake Cable Kit Cycling Gore Bike Wear Gore Bike Wear RideOn Low Friction White Brake Cable Kit: For use only on road bikes, this high performance cable system replaces galvanized, stainless steel, and other coated cables. Patented cable coating technology designed for low friction and durability. Designed to work mainly with road bikes but will work with MTB. There are two different lengths of cables in the kit. The longer cable and liner is for the rear brake, the shorter cable and liner is for the front brake. Each cable has 2 end terminations - a barrel end (mountain bike) and a pear end (road bike). Select the end that corresponds to your type of brake and remove the end termination you will not be using. Remove old cables and housing; note cable routing and location of ferrules. Using old housing pieces as a pattern, cut new housing lengths to match. Using wire cutters and awl make sure housing ends are free of burrs and wide open. Install new housing into place on bike. Turn barrel adjusters to fully clockwise. Carefully feed new cable through new housing and cable housing stops, adding ferrules as needed - nosed ferrules are to be used at the cable stops, the non-nosed ferrules should be used at the brake lever (if needed) and brake caliper. With cable held taught, secure it in pinch bolt and tighten to brake manufacturer's torque requirements. Trim off excess cable and crimp a cap on cable end. Slide red crimp cap cover over crimp cap. Adjust brakes as usual. Review this product |
Review this store |
£26.91 |
Visit Store » |
* Must be complete